7.54 The fracture strength of a certain type of manufactured glass is normally distributed with a mean of 579 MPa with a hackneyed deviation of 14 MPa. (a) What is the luck that a randomly chosen prove of glass give break at less than 579 MPa? (b) More than 590 MPa? (c) Less than 600 MPa? (Data ar from Science 283 [February 26, 1999], p. 1296.)
A) What is the probability that a randomly chosen sample of glass will break at less than 579 MPa?
z(579) = (579-579)/14 = 0
P(x < 579) = P(z<0) = 0.5000
B) More than 590 MPa?
z(590) = (590-579)/14= 11/14= 0.7857
P(x<500) = P(z< 0.7857) = 0.2160
C) Less Than 600 MPa?
z(600) = (600-579)/14 = 21/14= 3/2
P(x<600) = =P(z<3/2) = 0.9332
7.56 In a certain microwave oven on the high power setting, the era it takes a randomly chosen kernel of keynotecorn to dash off is normally distributed with a mean of 140 seconds and a standard deviation of 25 seconds. What percentage of the kernels will fail to pop if the popcorn is cooked for (a) 2 minutes? (b) Three minutes? (c) If you wanted 95 percent of the kernels to pop, what time would you allow? (d) If you wanted 99 percent to pop?
A) 2 minutes = 120 seconds
z(120) = 120-150)/25= -30/25 = -6/5= -1.2
P(z>-1.2) = 0.1151
B) 3 minutes = 180 seconds
z(180) = (180-150)/25=30/25 = 6/5 = 1.2
P(z>1.
2) = 0.1151
C) If you want 95% of the kernels to pop, what time would you allow?
(.95) = 1.645
x-150 = 25*1.645
x = 41.12 = 150= 191.12 seconds
x = 3 minutes and 11.12 seconds
D) If you want 99% to pop…
(.99) = 2.326
2.326 = (x-150)/25
x = 25* 2.326 + 150
x= 208.16 seconds
x = 3 minutes and 28.16 seconds
8.46 A random sample of 10 miniature Tootsie Rolls was taken from a bag. Each piece was weighed on a very holy scale. The results in grams were
3.087 3.131 3.241 3.241 3.270 3.353 3.400 3.411 3.437 3.477
(a) Construct a 90 percent authorisation interval for the true...If you want to get a full essay, graze it on our website: Orderessay
If you want to get a full essay, wisit our page: write my essay .
No comments:
Post a Comment